Connecting to screen read out

The [url=http://www.radarguns.com/sports-radar-radar-guns-dt100.html]DT100[/url] should have a 25 foot cable hard wired to it (not removeable) that
looks like a computer ethernet cable. This single cable plugs directly into
the display and supplies the power to the radar sensor. If it does not have
this, it should have a port on the unit that will accept a computer ethernet
cable. If your unit does not have a data port or a built in cable, please
call our customer service department so we can work out an exchange.

We currently have in stock the [url=http://www.radarguns.com/sports-radar-speed-radar-gun-accessories-dl731.html]Sports Radar 3 Digit Red Led 7\" Display
DL731[/url]. This display comes with an additional 25 ft cable plus a power
adapter for the display. This unit has only one port on it, so you can only
hook up one sensor at a time to it. You do not need any software to run the
unit with the display, only if you are going to run it on a PC. This display
unit can be mounted on a tripod (not recommended) or it can be hung on a
wall.

I bought a Sports Radar DT100, but it only came with a wall mounting
bracket. It didn`t include cables at all, nor AC adapter. In order to
make it work, I know I need to buy a Sports Radar 3 Digit Led 4"
Display DL431. What cables do I need including the ones to connect the
radar with the display and which AC adapter? Do I need a software if I
don`t need to connect it to a PC? I`m going to mount it in a golf net,
so I need to know what distance do you recommend between radar and
display and if I need any cable.